Single-Sided Cantilever Rack for Long Material Storage

Warehouses, lumberyards, manufacturing facilities, building material suppliers, and metal distributors frequently face the same storage challenge: how do you efficiently store products that are too long, bulky, or irregularly shaped for conventional pallet racking?

Lumber, steel bars, pipe, tubing, conduit, sheet materials, furniture, and structural components can consume enormous amounts of floor space when they are stacked horizontally. Traditional pallet racks may not solve the problem because their front columns divide the storage system into fixed-width bays.

A single-sided cantilever rack offers an alternative specifically designed for these types of materials.

Single-sided cantilever racking uses vertical uprights with horizontal arms projecting from only one side. This configuration creates an open storage face while allowing the back of the rack to be positioned along a wall or other appropriate area of a facility. The result is a storage system that can make better use of both horizontal and vertical warehouse space while maintaining convenient access to long inventory.

For facilities where floor space is valuable and access is required from only one side, single-sided cantilever rack can provide an efficient combination of storage density, accessibility, strength, and flexibility.

Understanding how these systems work—and how they compare with double-sided cantilever racks—can help businesses determine the appropriate configuration for their operations.

For a broader overview of cantilever rack configurations, components, applications, and general system-selection considerations, visit our Cantilever Rack Systems page.

What Is a Single-Sided Cantilever Rack?

A single-sided cantilever rack is an industrial storage system with horizontal load-bearing arms extending from one side of a series of vertical uprights.

Products are positioned horizontally across multiple arms. The arms provide support at strategic points along the length of the material while leaving the front of the storage system largely unobstructed.

This design differs significantly from conventional selective pallet rack.

A typical pallet rack uses upright frames at both the front and rear of the storage system. Horizontal beams connect those frames and create individual pallet openings. This works extremely well for palletized products but can create problems when storing exceptionally long inventory.

Cantilever racking eliminates the front columns.

Instead, the structural uprights are positioned toward the rear of the storage system, and arms project outward to support inventory.

This creates an open loading face where operators can store products such as:

  • Lumber
  • Steel pipe
  • PVC pipe
  • Tubing
  • Conduit
  • Steel bars
  • Structural components
  • Metal extrusions
  • Sheet materials
  • Building products
  • Furniture
  • Long manufactured components
  • Other oversized or irregularly shaped inventory

In a single-sided configuration, these arms project in only one direction. The rack can therefore be incorporated along walls and perimeter areas where access from the back of the rack is unnecessary.

Mustang Material Handling identifies this wall-oriented design as one of the primary advantages of single-sided cantilever rack because it can maximize available storage while maintaining accessibility from the aisle.

How Single-Sided Cantilever Racking Works

The operating principle of single-sided cantilever racking is straightforward.

Vertical uprights provide the structural backbone of the system. Horizontal cantilever arms attach to those uprights at various elevations. Products are then placed across two or more arms, distributing the weight along the rack.

Consider a lumber distributor storing 16-foot boards.

Instead of placing the lumber on the warehouse floor, bundles can be positioned horizontally across several cantilever arms. Additional arm levels can be installed above the first level, allowing different lumber dimensions or products to occupy the same floor area vertically.

A forklift approaches the open face of the rack, lifts a bundle, and positions it across the appropriate arms.

Because there are no front columns between the forklift and the inventory, the operator has relatively unrestricted horizontal access.

The same principle applies to steel pipe, tubing, bars, extrusions, furniture, and other oversized products.

Why Use a Single-Sided Cantilever Rack?

The primary advantage of single-sided cantilever rack is its ability to create usable storage along areas that might otherwise be inefficiently utilized.

Warehouse walls are a perfect example.

If access is only required from the aisle, installing storage arms on the back side of the rack would provide little benefit. A single-sided configuration concentrates storage on the accessible face instead.

This arrangement can provide several advantages.

Better Use of Wall Space

Single-sided cantilever racks are particularly well suited to warehouse perimeter storage.

A row can be positioned along a suitable wall, allowing the facility to use vertical space that might otherwise remain underutilized.

Instead of long products occupying floor space, inventory can be organized across several vertical storage levels.

Mustang describes single-sided systems as especially useful in facilities where space is at a premium because storage can be concentrated along walls without requiring an access aisle on both sides.

Open Access to Long Materials

The lack of front columns is one of the defining benefits of all cantilever racking.

Long products can extend horizontally across several uprights without being interrupted by conventional pallet rack frames.

This simplifies loading and retrieval for many types of long inventory.

Vertical Storage

Warehouse floor space is expensive.

A long bundle sitting on the floor uses horizontal space while leaving much of the vertical area above it unused.

Single-sided cantilever rack creates multiple storage levels within that same footprint.

The exact number of levels depends on rack height, product dimensions, capacity requirements, handling equipment, building clearances, and system design.

Improved Organization

Floor-stacked inventory can quickly become difficult to manage.

Different product lengths, dimensions, materials, or SKUs may be stacked together. Retrieving a particular bundle can require moving several other products first.

Cantilever racks provide designated storage levels.

A lumber supplier, for example, might dedicate individual levels to different board dimensions. A steel distributor could separate pipe by diameter, material, or length.

That organization can simplify inventory identification and retrieval.

Components of a Single-Sided Cantilever Rack

A cantilever rack may look simple, but several components work together to create a stable storage system.

Uprights

The upright is the vertical structural component from which the cantilever arms extend.

Upright capacity must account for the loads imposed by all of the arms attached to it. Overall rack height, arm spacing, number of levels, load weight, and system configuration can all influence upright requirements.

Structural systems can reach considerable heights. One of Mustang’s single-sided configurations, for example, describes uprights reaching approximately 192 inches. That figure is specific to the referenced system rather than a universal cantilever rack dimension.

Cantilever Arms

Cantilever arms directly support the stored material.

Arm length is selected according to the depth of the product being stored. Different systems may offer multiple arm lengths, capacities, and styles.

Mustang’s examples include configurations with arms extending as far as 60 inches. Depending on the particular system, adjustable or bolted arms may also allow storage levels to be repositioned as inventory requirements change.

Bases

The base extends outward from the bottom of the upright and plays an important role in stabilizing the rack.

Depending on the system design, the base may also provide the lowest storage position.

Bracing

Bracing connects adjacent uprights and helps stabilize the rack structure.

Brace dimensions and configurations depend on rack spacing and system engineering. Mustang’s referenced systems include bracing designed to connect towers and resist unwanted movement.

Anchoring

Proper anchoring is critical.

Cantilever racks should be installed according to manufacturer specifications, system engineering, floor conditions, and applicable requirements.

The rack should not simply be placed against a wall and assumed to be stable because of its location.

Single-Sided Cantilever Rack vs. Double-Sided Cantilever Rack

One of the most important decisions when planning a cantilever rack system is whether to use a single-sided or double-sided configuration.

Both use the same fundamental cantilever storage principle, but they are intended for different warehouse layouts.

Single-Sided Cantilever Rack

A single-sided system has arms extending from only one side of the upright.

It is generally best suited to:

  • Warehouse perimeter areas
  • Storage along walls
  • Areas where access is available from only one direction
  • Space-constrained facilities
  • Narrower storage areas
  • Layouts where preserving aisle space is important

The primary advantage is space efficiency.

Because inventory is accessed from only one face, the rack does not require a second aisle solely to access storage on the back.

Double-Sided Cantilever Rack

A double-sided cantilever rack has arms extending from both sides of the upright structure.

Instead of being positioned directly against a wall, it is normally placed where material handling equipment can access both sides.

This creates two storage faces.

Double-sided systems can therefore provide considerably more storage capacity per row when sufficient floor space and aisle access are available.

Which Configuration Is Better?

Neither is universally better.

The correct choice depends on warehouse layout.

If you have an unused perimeter wall and only need forklift access from the aisle, a single-sided rack is generally the logical configuration.

If you have open floor space and can create aisles on both sides of a rack row, a double-sided system may allow you to store more inventory within that central area.

Mustang similarly distinguishes single-sided systems as particularly effective for wall and space-constrained applications, while double-sided racks are more appropriate when greater capacity and access from both directions are needed.

Maximizing Warehouse Space With Single-Sided Cantilever Racking

The real value of a single-sided rack becomes apparent when evaluating the entire warehouse rather than just the rack itself.

Imagine a facility with long bundles of material stacked along an exterior wall.

The bundles may extend several feet into the warehouse, consuming valuable floor area. If different products are stacked on top of one another, employees may also need to move the upper bundles before reaching inventory underneath.

A single-sided cantilever rack can transform that same wall into multiple storage levels.

Instead of:

Product A
sitting beside
Product B
sitting beside
Product C

the facility may be able to arrange them vertically:

Upper level — Product C

Middle level — Product B

Lower level — Product A

The precise configuration depends on product dimensions, weight, rack capacity, forklift capabilities, and required clearances, but the principle is powerful.

The warehouse gains storage capacity without necessarily expanding its physical footprint.

Mustang’s discussion of single-sided racking specifically emphasizes this ability to use vertical space and reduce the need for access aisles on both sides of the storage system.

Single-Sided Cantilever Rack for Lumber

Lumber is one of the most common applications for cantilever racking.

Long boards and bundles are naturally suited to horizontal storage across multiple arms.

A building material supplier can organize different products by:

  • Length
  • Width
  • Thickness
  • Wood species
  • Product type
  • SKU
  • Turnover rate

Frequently accessed lumber can be positioned at convenient elevations, while reserve inventory may occupy other levels.

The open-front design also gives forklifts direct access to bundles without requiring operators to navigate around front columns.

Single-Sided Cantilever Rack for Pipe and Tubing

Pipe and tubing present similar challenges.

Long lengths can consume substantial floor space, and cylindrical products require appropriate support and handling considerations.

Single-sided cantilever racks allow these materials to be separated across designated storage levels while remaining accessible from the aisle.

Applications may include:

  • Steel pipe
  • PVC pipe
  • Copper tubing
  • Conduit
  • Mechanical tubing
  • Structural tubing

Arm style and accessories should be selected according to the material being stored, particularly when there is a possibility that round products could move or roll.

Steel and Metal Storage

Steel distributors, fabrication operations, and manufacturers may also use single-sided cantilever racking for long metal products.

Typical inventory can include:

  • Steel bars
  • Structural sections
  • Extrusions
  • Tubing
  • Profiles
  • Fabricated components
  • Long raw materials

These applications can involve substantial weights, making proper capacity calculations particularly important.

Structural cantilever systems may be appropriate for especially demanding industrial applications, while other constructions can serve lighter storage requirements.

The rack should be selected based on actual inventory characteristics rather than simply being labeled “heavy duty.”

Understanding Load Capacity

Capacity is one of the most important—and potentially misunderstood—parts of cantilever rack design.

There is no single universal answer to the question:

How much weight can a single-sided cantilever rack hold?

Capacity depends on the complete configuration.

Important factors include:

  • Individual arm capacity
  • Number of arms supporting each load
  • Upright capacity
  • Base capacity
  • Rack height
  • Arm length
  • Arm spacing
  • Load dimensions
  • Load weight
  • Load distribution
  • Number of storage levels
  • Brace configuration

The Mustang sources illustrate why capacity must be evaluated system by system. One referenced roll-formed configuration describes a capacity of up to 9,000 pounds per side with individual 60-inch arms rated at 1,650 pounds, while another structural configuration discusses individual arm capacities ranging from approximately 2,640 to 3,300 pounds.

Those numbers should not be treated as universal cantilever rack ratings.

They demonstrate that dramatically different capacities can exist depending on rack construction and configuration.

Proper Load Distribution

Individual arm capacity is only part of the equation.

A long product must also be supported at enough points to distribute its weight appropriately.

For example, imagine a uniformly distributed 6,000-pound bundle resting evenly across four arms.

In a simplified example:

6,000 Ă· 4 = 1,500 pounds per arm.

But if that same bundle is positioned incorrectly and most of its weight is carried by only three arms, the loading changes substantially.

Product characteristics matter as well.

Some long products can sag when support points are spaced too far apart. The number and spacing of arms should therefore consider both rack capacity and the physical characteristics of the material.

Actual rack design should always follow manufacturer specifications and appropriate engineering.

Adjustable Arms and Flexible Storage

Inventory requirements change.

A warehouse might initially store large bundles requiring substantial vertical clearance. Several years later, the same area may need to accommodate smaller products with more storage levels.

Adjustable cantilever arms can provide valuable flexibility.

Depending on the system, operators may be able to reposition arms vertically to create different storage openings. Additional arms may also be incorporated when permitted by the system design and capacity.

Mustang’s source material describes customizable single-sided systems with arm lengths ranging approximately from 36 to 60 inches, along with options for repositioning bolted arms.

This modularity can make cantilever racking more adaptable than fixed shelving for operations with changing inventory profiles.

Planning a Single-Sided Cantilever Rack Layout

Successful installation begins with accurate planning.

The first step is understanding the inventory.

Record the maximum and typical:

  • Product length
  • Product depth
  • Product height
  • Individual item weight
  • Bundle weight
  • Quantity
  • Handling frequency

Then evaluate the warehouse.

Important considerations include:

Wall and perimeter space. Determine where single-sided racks can be positioned without interfering with doors, equipment, utilities, or traffic.

Clear height. Ceiling height alone does not determine usable rack height. Sprinklers, lighting, HVAC systems, building structure, and required clearances must also be considered.

Forklift capabilities. The material handling equipment must be capable of reaching the intended storage elevations and safely handling the product.

Aisle width. Operators need sufficient maneuvering room for the equipment and loads being handled.

Floor conditions. The slab must be appropriate for the rack design, loads, and anchoring requirements.

Traffic patterns. Rack placement should support material flow rather than create unnecessary congestion.

A rack that looks efficient on a floor plan can perform poorly if operators cannot safely and efficiently approach it with long loads.

Installation and Anchoring

Proper installation is particularly important for cantilever racks because the loads extend outward from the upright structure.

Bases and uprights need to be correctly positioned, components properly connected, and the system anchored according to its engineering and manufacturer requirements.

Mustang’s installation guidance emphasizes alignment, appropriate anchoring, secure connections, and adherence to manufacturer instructions.

Professional installation may be appropriate, particularly for large or high-capacity systems.

Installation requirements can vary considerably according to rack type, manufacturer, facility conditions, floor construction, and applicable codes.

Inspection and Maintenance

Single-sided cantilever racks should be incorporated into a facility’s regular rack inspection program.

Inspections can look for:

  • Bent arms
  • Damaged uprights
  • Loose hardware
  • Damaged braces
  • Anchor problems
  • Corrosion
  • Misalignment
  • Missing components
  • Signs of forklift impact
  • Improperly positioned loads
  • Overloading
  • Unexpected deformation

Brace sets deserve attention because they contribute to overall rack stability.

Arm connections should also be inspected to ensure they remain secure and properly positioned.

Mustang recommends routine inspections and prompt attention to damaged or misaligned components as part of maintaining system durability and performance.

Any rack showing significant damage should be appropriately evaluated rather than simply continuing to be loaded.

Customizing Single-Sided Cantilever Racking

One of the advantages of cantilever storage is the ability to configure the system around the inventory.

Customization may include:

Arm length. Deeper products may require longer arms.

Arm capacity. Heavier materials require appropriately rated components.

Arm spacing. Vertical spacing can be configured around product height.

Upright height. Taller systems can provide additional storage levels when building and equipment conditions permit.

Upright spacing. Horizontal spacing should correspond with load length and required support points.

Arm style. Straight, inclined, or specialized arm configurations may be appropriate for different products.

Finish. Environmental conditions may influence coating or finish requirements.

The objective is not simply to install the maximum number of arms possible.

An efficient rack provides the right number of storage positions while maintaining appropriate load support, clearances, accessibility, and capacity.

When Does Single-Sided Cantilever Rack Make the Most Sense?

Single-sided cantilever racking is particularly attractive when a facility has a substantial amount of available perimeter space.

It can also be a strong choice when:

  • Long inventory is currently floor stacked.
  • Conventional pallet rack creates access problems.
  • Warehouse expansion is expensive or impractical.
  • Vertical space is underutilized.
  • Forklift access is required from only one direction.
  • Long products need better organization.
  • Inventory dimensions change regularly.
  • The operation needs an open-front storage system.
  • Wall areas are available for storage rows.

A double-sided rack may provide better storage density in open warehouse areas, but using double-sided equipment against a wall generally wastes the inaccessible rear storage face.

Matching rack configuration to location is therefore essential.

Improving Warehouse Workflow

The benefits of single-sided cantilever rack extend beyond storage capacity.

A properly organized system can also affect material movement.

Frequently accessed products can be positioned strategically. Similar products can be grouped together. Employees can identify designated storage locations more easily, and forklift operators may be able to retrieve inventory without first moving unrelated bundles.

These improvements can reduce unnecessary material handling.

The result is a storage system that supports the broader warehouse workflow rather than simply creating additional places to put inventory.

Choosing the Right Single-Sided Cantilever Rack

Before purchasing a system, facilities should answer several questions:

What are we storing?
Determine the exact dimensions and weights of products and bundles.

How many support points does the material require?
Long or flexible products may require additional arms.

How heavy are the loads?
Use verified weights rather than rough estimates.

How high can the forklift safely reach?
Usable storage height depends on material handling capabilities as well as building height.

How much wall space is available?
Identify perimeter areas that can support efficient rack placement.

Will inventory change?
Adjustability may be valuable for businesses with evolving product lines.

What rack construction is appropriate?
Light, medium, and heavy industrial applications may require substantially different systems.

What does the manufacturer require?
Capacity, anchoring, assembly, installation, and inspection requirements should be based on the specific rack system.

Answering these questions before selecting equipment helps ensure the rack is designed around the operation rather than forcing the operation to adapt around the rack.

Conclusion

A single-sided cantilever rack is one of the most practical storage solutions for long, bulky, heavy, and irregularly shaped inventory when warehouse access is required from only one direction.

The system uses vertical uprights with horizontal arms projecting from a single storage face. By eliminating front columns, cantilever racking provides open access to materials such as lumber, pipe, tubing, steel bars, extrusions, building products, furniture, and long manufactured components.

Its single-sided configuration makes the system especially valuable along warehouse walls and perimeter areas.

Instead of allowing long products to consume large areas of floor space, facilities can organize inventory vertically across multiple storage levels. This can improve space utilization, inventory organization, product accessibility, and material handling efficiency without necessarily increasing the physical size of the building.

Single-sided racks also offer an important alternative to double-sided cantilever racking.

A double-sided system can provide excellent storage density when placed in an open warehouse area where operators have access to both sides. Single-sided cantilever rack, however, is generally the more efficient solution when the rack is positioned along a wall or access is needed from only one side.

Selecting the correct system requires careful consideration of product dimensions, bundle weights, arm capacities, upright capacities, support spacing, rack height, forklift capabilities, aisle requirements, floor conditions, anchoring, and future inventory needs.

Customization can further improve the system. Adjustable arm positions, different arm lengths and capacities, varying upright heights, and appropriate bracing allow a cantilever rack to be designed around the products it actually needs to store.

Capacity should always be evaluated according to the specific rack configuration. As the Mustang Material Handling examples demonstrate, individual systems can have significantly different arm and overall capacities depending on their construction and design.

When properly designed, installed, loaded, and maintained, single-sided cantilever racking can transform underutilized perimeter space into productive storage while maintaining the open accessibility required for long materials.

For warehouses, lumberyards, manufacturing plants, steel suppliers, building material distributors, and other operations struggling with long products and limited floor space, single-sided cantilever rack offers a straightforward solution: use the wall, build vertically, keep the storage face open, and organize long inventory around the way it is actually handled.